![]() If the dirt is stuck inside those pins, use an air blower instead of anything that can possibly bend a pin. Now before you put back the CPU cooler again, it is important that you check for any dirt on the CPU or the CPU socket.Įven if there is a little dirt anywhere in the socket or the CPU, you will need to remove it with the help of an electronic brush.Įither your CPU or the CPU socket will have hundreds of small pins. > Put back the Processor gently by aligning the small arrow mark on your socket and CPU. > Remove the CPU from the socket by pulling the socket lever up. Remember that each cooler has a specific way of installation and therefore, removing it may require you to check the manual it came with. > Unplug the CPU cooler fan connector and uninstall the cooler. > Turn off your computer and remove the side panel. This problem can arise due to several reasons and doesn’t necessarily mean that your CPU is dead. This basically means that your computer cannot detect your CPU or Processor which is resulting in a boot failure. ![]() Reasons For Asus Motherboard Red LED LightĪ continuously always ON Red LED on Asus motherboards indicates no CPU or a faulty CPU. ![]() Each LED automatically turns off and your computer boots if there is no anomaly detected. These LEDs turn on continuously if there is a hardware failure until the problem is sorted out and don’t let the computer boot into your OS or even BIOS.Īsus motherboards generally cycle through each of these LEDs one by one after switching on a computer. Whenever your system fails to detect or establish a proper connection with any of the mentioned components, the associated LED with turn on. The Q-LEDs on an Asus motherboard are as follows-Įach LED is associated with different components of a computer where BOOT LED is related to storage drives, VGA to the graphics card, DRAM to RAM/Memory, and CPU to CPU/Processor.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |